Product Overview
CM-2300d is a portable integrating sphere spectrophotometer with multifunctional performance for various practical applications.
Portable, compact, lightweight, and stylish body 670 grams (excluding battery)
◆ Store up to 1700 pieces of data
High precision sensors measure repeatability with intervals of up to 10nm.
◆ Same as CM-2600d（ φ 8) Compatible with CM-2500d data
Main uses
It is ideal for color control of external plastics and resins in electronic products, vehicle paint, textiles, leather products, etc.
Main features
Can be measured at any location.
The use of xenon lamps allows the instrument to be placed at any position on the surface of the sample.
High precision measurement objects.
The portable and stylish body comes with an illuminated visitation mirror.
The portable and stylish body with illuminated sight glass allows users to quickly and accurately place instruments on objects for positioning.
Can be used in pharmaceuticals, cosmetics, printed goods, building materials, textiles, food, and so on.
Simultaneously measure SCI (including specular reflection) and SCE (excluding specular reflection).
In just 1.5 seconds, the data obtained from measuring both SCI and SCE will be displayed on the LCD. Unlike traditional spectrophotometers, there is no need to maneuver between SCI and SCE modes. Due to the fact that the measurement area does not change during mode switching, it improves work efficiency and provides stable measurement data. And the glossiness digital display monitoring can display the relative glossiness.
Can be used for plastics, paints, resins, and consumer goods
*SCI is a method of measurement that includes specular reflection. For this reason, it minimizes the influence of the sample surface and is particularly suitable for color quality monitoring and computer color matching.
*SCE is a measurement method that excludes specular reflection. The results obtained from this type of measurement are similar to those observed with the naked eye.
| 型號 | 分光測色計 CM2300d |
|---|---|
| 光源/觀測系統 | d/8（散射光源，8度觀測角），配有 SCI（包括鏡面反射分量/SCE（不包括鏡面反射分量）同步測量功能。（符合 CIE No.15、ISO 7724/1、ASTM E1164、DIN 5033 Teil7、 JIS Z8722 Condition c 標準。） |
| 積分球大小 | ?52mm |
| 傳感器 | 硅光電二極管陣列（雙列 40 元件） |
| 光譜分離設備 | 衍射光柵 |
| 波長范圍 | 360nm 到740nm |
| 波長間距 | 10nm |
| 光譜半帶寬 | 約10nm |
| 反射率范圍 | 0到175%，顯示分辨率：0.01% |
| 光源 | 2個脈沖氙燈 |
| 測量時間 | 約 1.5 秒 |
| 最小測量間隔 | 3 秒（在23°C時） |
| 電池性能 | 以 10 秒為間隔約 1000 次（使用堿性電池時）（在23°C時） |
| 測量/照明區域 | ?8mm/?11mm |
| 重復性 | 光譜反射率 : 標準偏差在 0.2% 以內（360 到380nm : 標準偏差在 0.4% 以內） 色別 : 標準偏差 E*ab 在 0.08 以內（在白板校正后以 10 秒為間隔測量 30 次白色校正板） |
| 器間差 | ΔΕ*ab 在 0.4 以內（SCI）（基于 12 BCRA Series II 色階的平均值，比較對象為在23°C時通過主機身測得的值） |
| 語言模式 | 英語/中文 |
| 測量模式 | 單次/平均化（自動模式 : 1 到 8次/手動模式） |
| 端口 | RJ45類型接口的RS-232C串口，使用標配的USB-串口轉接線IF-A24，可實現USB2.0通訊 |
| 觀察者 | 2/10度 |
| 觀察用光源 | A、C、D50、D65、F2、F6、F7、F8、F10、F11、F12（使用 兩個光源可進行同步計算） |
| 顯示 | 光譜值/圖表、色度值、色差值、"合格/不合格"結果、相對光澤度 |
| 色度空間/色度數據 | L*a*b*、L*C*h、Yxy、XYZ、MI、 E*ab、CMC (1:1)、CMC(2:1)、CIE94、CIE DE2000、WI (ASTM E313)、YI (ASTM D1925) |
| 可儲存的數據組 | 1,700（每個數據組由一對 SCI/SCE 數據組成） |
| 允拒收判定 | 色度允拒收值（只能設定一組允拒收值） |
| 電源 | AA 電池（×4），AC 適配器 |
| 大小 | 69（寬) × 96（高）× 193（長）mm |
| 重量 | 約 670g（包括"測量臺"/不包括電池） |
| 運行溫度/濕度范圍 | 5°C 到 40°C，相對濕度 80% 或更低（在 35°C 下），無水氣凝結 |
| 存放溫度/濕度范圍 | 0°C 到 45°C，相對濕度 80% 或更低（在 35°C 下）， 無水氣凝結 |
| 標準配件 | 白色校正板CM-A145，?8mm目標罩CM-A146，USB-串口轉接線IF-A24， 電源適配器AC-A305，5號電池×4，?3mm目標罩 CM-A147 |
| 可選配件 | 零校正盒 : CM-A32 |
| 硬盒 CM-A148 | |
| 防塵蓋套件 : CM-A149 | |
| 防塵蓋 : CM-A152 | |
| 色彩數據軟件"SpectraMagic NX": CM-S100w | |
| 打印機電纜（D-sub 9 針，適用于串口鏈接）: CR-A75 | |
| RS-232C連接線IF-A16 |
