1. The inner liner material is made of stainless steel, and the outer shell is made of cold-rolled sheet with electrostatic spraying. Adopting imported intelligent temperature control instruments
2. Small programmable controllers with protective functions for each system.
3. Metal mesh nominal wire diameter: 50 μ M
4. Nominal spacing between lines: 75 μ M
5. Dosage of talc powder: 2kg/m3~4kg/m3
6. Conduct dust tests on electrical, electronic, automotive, motorcycle, and other products and components.
Execution standards and test methods:
1. GB4208-93 Dust Test Methods
2. GB2423.37-89 Test Method for Sand and Dust
3. GJB150.12 Sand and Dust Test Method
4. GB10485 Dust Test Method
規格：
型號 | CZ-500SC | CZ-800SC | CZ-1000SC | CZ-1500SC | CZ-2000SC | |
| 工作室容積(L) | 500 | 800 | 1000 | 1500 | 2600 | |
| 技術特性 | 金屬篩網標準間距 | 50μm | ||||
| 金屬絲直徑 | 7550μm | |||||
| 滑石粉用量 | 2Kg/m2 | |||||
| 噴粉降塵形式 | 1.自由降塵式：采用離心機將砂塵吹至箱頂替1/5高度使其自由沉將 2.吹砂塵：底部氣壓噴灰，三檔壓力可調 | |||||
| 控制系統 | 操作界面 | 液晶顯示觸摸屏控制器或按鍵式液晶顯示控制器(可選) | ||||
| 運行方式 | 程式運轉/恒定運行 | |||||
| 輸入 | P-100傳感器 | |||||
| 使用電源 | AC 380V 50Hz | |||||
| 標準配置 | 測試物料架兩塊,說明書1份,粉塵篩1個 | |||||
