Brief introduction:
The Q-3A sample cutting machine is used to cut general metallographic and petrographic sample materials. The body is equipped with a cooling channel, and the heat generated during cutting can be taken away by the configured cooling liquid during cutting to avoid overheating the sample and burning the tissue.
1、 Overview:
The Q-3A sample cutting machine is used to cut general metallographic and petrographic sample materials. The body is equipped with a cooling channel, and the heat generated during cutting can be taken away by the configured cooling liquid during cutting to avoid overheating the sample and burning the tissue. The cutting of sample materials such as rocks and ceramics requires the use of diamond grinding wheels (diamond grinding wheels require special orders). This machine is easy to operate, safe and reliable, and is one of the essential equipment for laboratory sample preparation.
2、 Technical indicators:
1. Power supply: 380V, 50HZ
2. Spindle speed: 2800 rpm
3. Grinding wheel specification: 250 × two × 32mm
4. Maximum cutting diameter: ? 55mm
5. Motor power: 2.2KW
6. Independent cooling system